An ideal Rankine cycle with reheat uses water as the working fluid. The conditions at the inlet to the first-stage turbine are p1 2500 lbf/in.2 , T1 1000F. The steam is reheated at constant pressure p between the turbine stages to 1000F. The condenser pressure is 1 lbf/in.2
(a) If p p1 0.2, determine the cycle thermal efficiency and the steam quality at the exit of the second-stage turbine.
(b) Plot the quantities of part (a) versus the pressure ratio p p1 ranging from 0.05 to 1.0.
Save your time - order a paper!
Get your paper written from scratch within the tight deadline. Our service is a reliable solution to all your troubles. Place an order on any task and we will take care of it. You wonât have to worry about the quality and deadlinesOrder Paper Now
An ideal Rankine cycle with reheat uses water as the working fluid. The conditions at the inlet to the first-stage turbine are 14 MPa, 600C and the steam is reheated between the turbine stages to 600C. For a condenser pressure of 6 kPa, plot the cycle thermal efficiency versus reheat pressure for pressures ranging from 2 to 12 MPa.